- Shenyun
- 1000ml 1500ml 2000ml
Description:1.0 Product description Negative pressure drainage set:composed of Guided needles, Silicone drainage ball, Silicone drainage tube, Drainage bagA medical device used for clinical surg cal to drainage blood and fluidaccumulated from human tissues or body cavity , prevent postoperativeinfection
Drainage bags (negative pressure drainage kit accessory) details
1.0 Product description
Negative pressure drainage set:composed of Guided needles, Silicone drainage ball, Silicone drainage tube, Drainage bag
A medical device used for clinical surg cal to drainage blood and fluidaccumulated from human tissues or body cavity , prevent postoperativeinfection and promote wound healing.
1.It is made of medical grade silicone with good bio compatibility X-rayline through the tube .
2.There are four internal charls to faciltate faster drainage of secretions.
3.The integrated extrusion process of the tube without connector , whichreduces the patient's pain when removing the tube body.
4.Stainless steel trocar can be used for surgical puncture , and negativesilicone reservoir can be used to connect tube to drainage fluid.
2.0 Instructions
Your Shenyun drain has a soft plastic bulb with a stopper and a flexible tube attached The drainage end of the tubing goes into your surgical site through the insertion site. The insertion site is the small opening near your incision.
A suture (stitch) holds the drainage end in place. The rest of the tube extends outside your body and is attached to the bulb.
When the bulb is compressed (squeezed) with the stopper in place, this creates a constant gentle suction. The bulb should be compressed at all times, except when you’re emptying the drainage.
Everyone’s drainage is different. Some people drain a lot, some only a little. Write down the amount of drainage you have in the drainage log at the end of this resource. Bring your log to your follow-up appointments.
How long you’ll have your Shenyun drain depends on your surgery and the amount of drainage you have. Call your healthcare provider if your drainage is 30 milliliters (mL) or less in a 24-hour period. Your surgeon may remove your Shenyun drain or keep it in longer for certain procedures
How to care for your Shenyun drain
·When you leave the hospital, care for your Shenyun drain by:
·Milking your tubing to help move clots.
·Emptying your drain 2 times a day. Do this once in the morning and once in the evening. Write down the amount of drainage on your Shenyun drainage log at the end of this resource. If you have more than 1 drain, measure and write down the drainage of each one separately. Do not add them together.
3.0 Performance parameters
Place of Origin | Suzhou China | Size | / | Quality Certification | CE |
Brand Name | SHENYUN | Stock | Yes | Instrument classification | Class II |
Model Number | / | Shelf Life | 2 years | OEM | Yes |
Disinfecting Type | EO | Material | Silicone | MOQ | 500PCS |
4.0 Model specifications
Model | Specification |
Drainage tube | I Type、II Type、III Type、Ⅳ Type、V Type |
Silicone drainage ball | A Type、B Type |
Guided needles | 8Fr 、10Fr 、12Fr 、14Fr 、16Fr 、18Fr 、20Fr 、22Fr 、24Fr |
Drainage bag | 1000 Ml |
There are five types of drainage tubes: round, flat, cross, T-shaped, and spiral. The specifications are divided according to different diameters
Drainage tube specifications
Model | Specification | Reference |
I Type | 8Fr 、10Fr 、12Fr 、14Fr 、16Fr 、18Fr 、20Fr 、22Fr 、24Fr 、26Fr 、28Fr 、30Fr、32Fr 、34Fr 、36Fr 、38Fr |
|
II Type | 10Fr 、12Fr 、14Fr 、16Fr 、18Fr 、 20Fr 、22Fr 、24Fr |
|
III Type | 7mm 、10mm |
|
Ⅳ Type | 16Fr 、18Fr |
|
V Type | 16Fr 、18Fr 、20Fr |
|
Silicone drainage ball: divided into type A and type B
Silicone drainage ball specifications
Model | Specification | Reference |
A Type |
100mL,200mL |
|
B Type |
100mL,200mL |
|
Guided needles: three-edge needle tip sharp, easy to puncture, small wound, to prevent too large wound caused by exudation.(Customizable on demand Different needles of flat head, tower, plastic and shovel type)
Guided needle specifications
Model | Specification | Reference |
I Type |
8Fr 、10Fr 、12Fr 、14Fr 、16Fr 、18Fr 、20Fr 、22Fr 、24Fr |
|
II Type |
8Fr 、10Fr 、12Fr 、14Fr 、16Fr 、18Fr 、20Fr 、22Fr 、24Fr |
|
Drainage bag specifications
Model | Specification | Reference |
I Type |
1000 Ml |
|
5.0 Frequently Asked Questions about Drainage Tubes
Problem · No drainage. · A sudden decrease in the amount of drainage. · Drainage around the tubing insertion site or on the bandage covering the tubing. | Reason · Sometimes string-like clots clump together in the tubing. This can block the flow of drainage. What to do · Milk your tubing using the steps in the “Milk your tubing” section of this resource. · If there’s no increase in drainage flow, call your healthcare provider. If it happens after business hours, call the next day. |
Problem · The tubing falls out of your insertion site. | Reason · This can happen if the tubing is pulled. It rarely happens because the tubing is held in place with sutures. What to do · Place a new bandage over the site and call your healthcare provider. |
Problem · You have redness greater than the size of a dime, swelling, heat, or pus around your insertion site. | Reason · These may be signs of an infection. What to do · Take your temperature. Call your healthcare provider and describe the signs of infection around your insertion site. Tell them if you have a fever of 101 °F (38.3 °C) or higher. |
6.0 When to call your healthcare provider
·You have bright red drainage.
·You have a fever of 101 °F (38.3 °C) or higher.
·You have increased redness, tenderness, swelling, pressure or pus at your insertion site.
·Your skin is hot to the touch around the surgical sites.
·You cannot move a clot into the bulb and there’s little or no drainage in the bulb.
7.0 Why Choose Us
· For all your inquires about us or our products, we will reply you in detail within 24 hours.
· We own professional team have professional attitude to recommend products and services, introducing the products for you.
· Our products have various type and function,We will recommend to you that according to your requirements;We offer OEM services; Can print your own logo on the products.
· We have very experienced engineers, can help you better use our products.
Your satisfaction is our duty! It will be our great honor to serve you. We do hope we can offer you more help in medical field and build the long term business relationship with you
"Manufacturing first-class products, providing satisfactory service, customer first" is our commitment.